Launched:self-serve migrations intoSuperhuman Docs (Coda)
Try it now
01Agent-first
Runs where you already work
Plug it into Claude, ChatGPT or Cursor. Describe the move in plain English; the agent runs it.
02Engineer-led
Our production engine, unlocked
The pipeline our engineers use on managed enterprise migrations — the same code, now something you can drive yourself.
03Pricing
Try 10 pages free, then $1 a page
Credit-based, pay-as-you-go. No scoping call, no quote — sample it on your own docs before you spend anything.
04Sources
NotionSlabConfluenceSoonGoogle DocsSoon
Skip to content

AI Agent vs Migration Tool: What a Migration Engine Does Differently

A migration engine keeps dates, authors and relationships by using import paths, ID maps and reconciliation checks that conversational MCP tools were not built for. Here is what each of its ten components does.

Abdul Aleem Abdul Aleem · · 18 min read
AI Agent vs Migration Tool: What a Migration Engine Does Differently
TALK TO AN ENGINEER

Planning a migration?

Get a free 30-min call with our engineers. We'll review your setup and map out a custom migration plan — no obligation.

Schedule a free call
  • 1,500+ migrations completed
  • Zero downtime guaranteed
  • Transparent, fixed pricing
  • Project success responsibility
  • Post-migration support included

AI Agent vs Migration Tool: What a Migration Engine Does Differently

A migration engine is a deterministic pipeline that reads every record from a source platform, transforms it with a frozen field mapping, and writes it to the destination through that platform's import path. Dates, authors, attachments and relationships survive the move. A general-purpose AI agent connected to vendor MCP tools can read and write records one at a time. Those tools are built for conversational work on a few records, and they leave out the ten or so components that turn a bulk copy into a controlled migration.

The model is not the problem. A migration is a bulk, one-time job that is hard to reverse, and it needs a migration engine and someone accountable for the result. If you are weighing an AI agent as an alternative to a dedicated migration tool, the short answer is to use AI around the migration, not as the engine. This article covers each component, the vendor constraint behind it, what fails without it, and where an agent genuinely helps.

Info

Vendor behaviour cited below was verified against each vendor's own documentation on 17 November 2026. MCP servers and APIs change often, so check the linked pages before a production run.

What does a migration engine do that a general-purpose agent does not?

A migration engine is software built to move an entire dataset (tickets, contacts, conversations, articles, attachments) from one platform to another while keeping history, relationships and metadata. It runs a deterministic pipeline: extract, transform, load, validate. Every run on the same input produces the same output.

A general-purpose AI agent is a language model that plans a task and calls tools one at a time. That suits ad-hoc work. A data migration is a bulk job with strict correctness requirements. Anthropic's engineering team writes that "the autonomous nature of agents means higher costs, and the potential for compounding errors," and recommends testing in sandboxed environments with guardrails (anthropic.com). OpenAI's agent safety guidance says to enable tool approvals so users can review and confirm every MCP operation (developers.openai.com). That is a sensible default for assistant work. A migration makes hundreds of thousands of writes, and nobody can approve them one at a time.

The difference is not intelligence. It is architecture. Below are the ten components that architecture needs, with the failure each one prevents.

Component 1: Import-specific endpoints that keep dates and authors

What goes wrong without it: Every migrated record shows the migration date. Tickets show the connected user as the author. Historical tickets can trigger emails to customers.

Most platforms treat the created date, the author and the closed date as system fields. Each platform has one specific path that can set them, and it is usually not the generic create tool an agent reaches for.

Zendesk. The Ticket Import API sets solved_at, updated_at and created_at on tickets, and created_at on comments. Zendesk says triggers won't run on a ticket imported with a status other than closed, and users CC'd on imported tickets get no notifications (developer.zendesk.com). A ticket created through the normal create endpoint is stamped with the current time instead. Zendesk warns that tickets made with Create Many Tickets "may be affected by your business rules," which can include emailing end users, and points historical imports to the bulk import endpoint (developer.zendesk.com). Deleting those tickets afterwards does not recall an email that already went out.

Salesforce. The audit fields CreatedDate, CreatedById, LastModifiedDate and LastModifiedById can be set only on insert. The org must enable "Set Audit Fields upon Record Creation", and the loading user needs that permission (developer.salesforce.com). A record inserted without it carries the load date and the loading user, and a later update cannot change them.

HubSpot. The Create date property is read-only for all objects except deals (knowledge.hubspot.com).

Intercom. The REST Create Conversation API accepts created_at for past conversations. The Intercom MCP server has no tool to create conversations, and articles created through it are attributed to the admin who authorized the connection (developers.intercom.com).

The vendor MCP servers expose conversational create and update tools, not these import paths. Salesforce's createSobjectRecord, for example, creates one record per call (developer.salesforce.com).

Warning

An email cannot be unsent. A run against the wrong endpoint means deleting the created records and contacting the affected customers before the migration can start again on the right path.

Component 2: Retrieval of archived and soft-deleted records

What goes wrong without it: The run completes with a subset of records. Users find the gaps weeks later when they search for an old ticket.

Default list calls skip records a migration needs. An agent that pages through "all tickets" and counts the result misses them and reports success.

  • Zendesk archives tickets 120 days after they close (support.zendesk.com). "Archived tickets are not included" in the list tickets responses, and Zendesk recommends the Incremental Ticket Export endpoints to get every ticket (developer.zendesk.com). Incremental exports are limited to 10 requests per minute, or 30 with the High Volume add-on (developer.zendesk.com).
  • HubSpot says archived CRM objects won't appear in any search results (developers.hubspot.com).
  • Salesforce returns records soft-deleted by a merge or delete, and archived task and event records, only through the QueryAll resource, not the Query resource (developer.salesforce.com).

A migration engine knows which call returns the full set on each platform. It also knows the export caps. HubSpot's CRM search, which the HubSpot MCP search tool relies on, is limited to 10,000 total results for any query and 200 objects per page. Paging past that limit returns an error, not more records (developers.hubspot.com). An export of "every contact since 2019" built on search stops at 10,000 unless someone checks the total against the source.

Recovery cost when this fails: Finding the missing records takes a full audit against the source. For large datasets that can take days of engineering time. If users have started working in the destination, the missing records must be inserted without overwriting new activity.

Component 3: Persistent ID map and parent-before-child load order

What goes wrong without it: Child records are created with broken parent references. Associations fail. A retry of a failed run creates duplicate, orphaned records.

A source-to-destination ID map is a persistent lookup table of every source ID and its destination ID. It has to survive across sessions. It cannot live in a context window, and rebuilding it after a failure means re-querying every record in both systems.

The map does two jobs. It keeps referential integrity (a comment linked to its ticket, an email to its deal, a note to its contact). It makes retries idempotent, because the loader can see whether a source record already exists in the destination before it creates one.

Related records load in order. A typical help desk order is custom fields and ticket forms, then groups, organizations, users, tickets and comments. HubSpot associations need the IDs of both records, so parents must exist before children can be linked (developers.hubspot.com). Salesforce upsert by external ID lets a child record reference its parent by external ID (developer.salesforce.com).

A 200,000-row ID map does not fit in a conversation. Claude Code warns when MCP tool output exceeds 10,000 tokens and limits it to 25,000 tokens by default (code.claude.com). Anthropic's engineering team notes that models "may be more likely to make mistakes when copying data between tool calls," and recommends that agents write code that processes data outside the model (anthropic.com). That recommendation describes what a migration engine already does.

Component 4: Idempotent loads by external ID

What goes wrong without it: A network timeout at record 40,000 of 100,000 leaves the dataset half-loaded. Restarting from the top creates 40,000 duplicates. Finding and deleting them without touching live records is days of manual work.

Idempotent loading means that running the same load twice gives the same result. The second run updates existing records instead of creating new ones. The loader keys each record on an external ID, usually the source system's record ID.

  • Salesforce upsert by external ID makes a load idempotent, so a retry updates the record it already wrote (developer.salesforce.com).
  • HubSpot imports match on email or Record ID, and rows without one become new records. HubSpot also says companies created through the API "will not be deduplicated by the Company domain name property" (knowledge.hubspot.com).
  • Zendesk ticket creation accepts an Idempotency-Key header. Keys expire after two hours, and a duplicate key sent after that creates a new ticket (developer.zendesk.com).

Salesforce's hosted MCP server has no upsert tool (developer.salesforce.com). An agent that retries a failed batch through create tools doubles the data unless someone wrote deduplication logic. That logic must itself be idempotent, must tell new records from duplicates, and must not overwrite fields changed since the last attempt.

Recovery cost when this fails: Duplicate CRM records distort pipeline reports, analytics and segments. Deduplication tools exist, but they need manual review so that two genuinely different records are not merged.

Component 5: Attachment handling within expiry windows

What goes wrong without it: Attachments go missing or links break after the run. Users find out when they open a historical ticket.

Attachments are a common source of silent loss, because both ends use short-lived tokens and URLs that must be coordinated within tight windows.

Zendesk attachment uploads return a token that must be attached to a ticket within 60 minutes (developer.zendesk.com). The workflow is upload the file, record the token, then create the comment with the token, all inside that window.

Notion-hosted file URLs expire after one hour (developers.notion.com). An agent that copies a Notion file URL into the destination record, instead of downloading the file, ships a link that stops working within the hour.

A migration engine pipelines the work: download the source file, upload it to the destination, attach it inside the token window, and record the result. It tracks which attachments succeeded and retries only the failures. It also handles each platform's file size limits and its inline and external attachment behaviour.

Component 6: Pausing destination automations before import

What goes wrong without it: Welcome emails go to contacts imported from 2019. SLA clocks start on cases resolved years ago. Alerts fire for every historical ticket. Assignment rules redistribute your team's current workload.

Zendesk's import endpoint is built for this. Triggers won't run on tickets imported with a status other than closed, and CC'd users get no notifications (developer.zendesk.com). Records created through the normal endpoints behave like new activity, so business rules can run and email end users (developer.zendesk.com).

Salesforce's Trailhead module on loading large data volumes says to set validation rules, lead and case assignment rules, and territory assignment rules to inactive before a large load, and to disable triggers through a custom setting. Afterwards it says to "Turn validation, workflow, and assignment rules back on" (trailhead.salesforce.com).

A migration engine knows which automations to pause on each platform. It pauses them before the load and restores them after verification. It records what it paused, so the state can be put back by hand if a restore step fails.

Component 7: Per-platform, per-endpoint rate-limit backoff

What goes wrong without it: A burst of 429 errors mid-migration leaves the dataset half-written. Without an ID map of what succeeded, there is no clean way to resume. The choice is between accepting duplicates and starting over.

Every SaaS API enforces limits that vary by platform, endpoint and plan:

  • HubSpot CRM search: five requests per second per account, 200 objects per page, and 10,000 results per query (developers.hubspot.com).
  • Zendesk Support API: 200 requests per minute on Team, 400 on Professional, 700 on Enterprise and 2,500 with the High Volume add-on. Incremental exports allow 10 requests per minute (developer.zendesk.com).
  • Freshdesk MCP integration: 25 actions per minute on Growth, 50 on Pro and 100 on Enterprise, with 1,200 to 12,000 included actions per year (support.freshdesk.com).
  • Notion API: about three requests per second on average (developers.notion.com).

A migration engine applies backoff per platform and per endpoint, with exponential retry and jitter. It reads rate-limit headers where they exist, tracks consumption across concurrent workers, and throttles before the 429s arrive. It logs each throttle event, so the total run time can be estimated and watched.

An agent calling MCP tools sees one call at a time. If it runs calls in parallel, or a user asks it to go faster, nothing coordinates consumption across those calls.

Component 8: Frozen field mapping from a reviewed sample

What goes wrong without it: The production run maps fields differently from the approved sample. A value in the wrong destination field looks like correct data until someone notices a specific record is wrong.

The field mapping says how every source field maps to a destination field: which fields transfer, which transforms apply (date formats, picklist values, HTML stripping), and which are dropped. In a migration engine, the mapping is defined during scoping, tested on a sample migration, reviewed by a person who knows the data, and then locked. The same frozen mapping runs the full migration and any delta sync.

This is a control, not a convenience. The approved sample becomes the production specification. Sample and production cannot drift, because both use the same frozen file.

An agent builds its mapping from documentation or inference at run time. If the prompt changes, the model version changes, or the agent meets an unfamiliar field value, the mapping can shift. Anthropic's documentation notes that results are not fully deterministic even at temperature 0 (platform.claude.com). For a production migration, that means the full run can diverge from the reviewed sample with no diff to compare.

Recovery cost when this fails: Values in the wrong fields cannot be found without comparing records against the source. Automated checks find missing values. They do not reliably find a value in the wrong field. Quandri's engineering team, writing about an LLM-assisted migration, notes that a score cannot see a value placed in the wrong field (quandri.io).

Component 9: Reconciliation report with per-object counts and checksums

What goes wrong without it: The migration reports "complete." Users find missing records in production. There is no record of what moved, what failed and why, which is a compliance problem for regulated data.

After a migration, the question is not "did it finish?" It is "does the destination match the source, and can I show it?" A reconciliation report contains:

  • Per-object record counts: source count and destination count, by object type
  • Rejected records with reasons: validation failures, missing parent references, duplicate key conflicts
  • Field-level validation on a sample: checks that field values transferred correctly
  • Referential integrity checks: every child record points to a valid parent
  • Checksums where supported: a byte-level match for attachments

The engine also keeps a run ledger, a durable record of every read, transform, write, retry, skip and validation:

source_key: zendesk.ticket.12345
destination_key: front.conversation.98765
run_id: 2026-11-02T02:00:00Z
status: loaded
attempt: 2
checksum: 9f3c8a2b...
rejection_reason: null

Under GDPR Article 5(2), the controller must be able to demonstrate compliance with the data protection principles (gdpr-info.eu). That means knowing what moved, when, what did not move, and who had access. A chat transcript ending in "Migration complete! All records transferred successfully" does not show any of that.

Component 10: Automation and trigger restoration after import

What goes wrong without it: Automations stay paused after the migration. New live records miss SLA timers, routing rules and workflow enrollments. Operations notices only when customer-facing SLAs are breached.

Pausing automations before import (Component 6) is half the job. The restore step must be verified, logged and confirmed before the destination goes live. That needs:

  • A list of every automation, trigger and workflow that was paused
  • A check that each one returned to its original state (active, inactive or conditional), not simply switched on
  • A smoke test after restoration: create a test record and confirm the expected automations fire

This step is easy to skip under time pressure during cutover. A migration engine includes it in the pipeline.


Failure modes: which components fail most often, and what recovery costs

This is our assessment, based on how each failure behaves:

Component Failure likelihood without an engine Recovery cost Detectability
Import-specific endpoints Certain if standard create endpoints are used High. Emails sent, history re-dated, re-migration needed Immediate (wrong dates visible)
Archived records retrieval High Medium to high. Gap audit needed, harder once live work starts Low (silent omission)
Idempotent loads High on any retry High. Deduplication work, distorted analytics Low (duplicates appear gradually)
Attachment expiry handling High Medium. Re-migrate attachments only Low (links look valid, break later)
Frozen mapping Medium High. No automated detection of wrong-field values Very low
Automation pausing Medium to high Medium to high. Sent emails cannot be recalled Immediate (noise, alerts)
Persistent ID map High on multi-session runs High. Orphaned records, broken associations Low
Rate-limit backoff Medium Medium. Partial load, restart needed Medium (errors logged)
Reconciliation report Not a failure, an absence Ongoing. No basis for audit or gap detection Not applicable
Automation restoration Low to medium Medium. SLA breaches, missed routing Low (gradual degradation)

The two highest-risk failures are silent omissions (archived records, broken attachments) and wrong-field placement. Only a deliberate audit finds them. A completion message does not.


Decision framework: when is an agent acceptable, and when is an engine required?

Is the total record count under 1,000?
├── Yes → Is the data reversible (no live users, staging environment)?
│         ├── Yes → Agent may be acceptable with human review of every record
│         └── No → Use an engine
└── No → Use an engine

Does the migration need original dates and authors (created_at, created_by)?
├── Yes → Use an engine (import endpoints required)
└── No → Continue

Are there compliance requirements (GDPR, HIPAA, SOC 2)?
├── Yes → Use an engine (reconciliation report required)
└── No → Continue

Are automations active on the destination?
├── Yes → Use an engine (automation pausing required)
└── No → Agent may be acceptable for small, reversible loads only

The practical threshold: if the load is over 1,000 records, original dates matter, compliance evidence is required, or automations are live, run it through an engine. That holds regardless of how capable the model is.


Why vendor MCP tools are not migration infrastructure

Vendor MCP tools are designed for conversational work: query, fetch, create, update, repeat. That is the right design for an assistant. It is not the same as replaying the full history of an account. The vendors' own documentation shows it:

HubSpot. The remote HubSpot MCP server's get_crm_objects takes at most 100 object IDs per request, and search_crm_objects returns at most 200 results per page (developers.hubspot.com). The CRM search it relies on stops at 10,000 total results per query (developers.hubspot.com). An agent copying 50,000 contacts through search gets 10,000 unless someone checks the total against the source.

Zendesk. Zendesk Bridge, Zendesk's layer for external AI agents, entered early access on 10 November 2026. During early access, bulk exports and destructive skills are not available (support.zendesk.com). It is an interaction layer, not an ETL pipeline.

Intercom. The Intercom MCP server's search tools return up to 150 items per page. It has no tool to create conversations or contacts, and articles it creates carry the authorizing admin as author (developers.intercom.com).

Salesforce. Salesforce's hosted MCP server creates one record per call with createSobjectRecord. It has no upsert, QueryAll or undelete tool, and soqlQuery returns at most 50,000 records per transaction (developer.salesforce.com). For large loads, Salesforce documents Bulk API 2.0 (developer.salesforce.com).

Freshdesk. The Freshdesk MCP integration allows 100 actions a minute and 12,000 included actions a year on Enterprise (support.freshdesk.com). By our arithmetic, writing 100,000 records at one per action takes at least 1,000 minutes and more than eight times the annual included allowance.

Passing large datasets through a context window adds to every limit above. Anthropic's engineering team recommends that agents write code to process data outside the model (anthropic.com). That describes a migration engine: deterministic code running outside the model, with the model involved in drafting and reviewing the logic.


Where AI genuinely adds value in a migration

AI belongs in drafting, reviewing and surfacing anomalies. The pattern across published cases is consistent: AI drafts, a person reviews, deterministic code runs the job.

Schema discovery and first-draft field mappings. A model can read source and destination schemas and propose a mapping. Salesforce's hosted MCP server exposes getObjectSchema, which returns picklist values and admin-written guidance, good input for a draft (developer.salesforce.com). A person still reviews the draft for business logic, edge cases and compliance constraints.

Transformation code and tests. The dlt team migrated HubSpot to Attio with an AI drafting the model, transforms and tests while people reviewed every change and ran a staged rollout. The AI proposed a design that conflicted with GDPR deletion rules, and a human reviewer caught it before the code ran (dlthub.com).

Generate, run and score loops on real records. Quandri's team used an LLM to write data adapters over about 40 iterations, with a domain expert reviewing. They note that a score cannot see a value placed in the wrong field, so human review of sample records stays in the loop (quandri.io).

Spot checks after the load. A model is good at sampling a reconciliation report and flagging outliers. It does not replace per-object counts and referential integrity checks.

Tip

Before you hand a migration to an AI agent, ask two questions. Who is accountable when record 60,000 of 100,000 creates a duplicate, emails a customer or drops an attachment? What is the recovery plan if that happens after users start working in the destination? Anthropic's commercial terms provide the services "AS IS" and cap liability at fees paid in the previous 12 months (anthropic.com). OpenAI's services agreement does the same (openai.com). Those terms are reasonable for a general-purpose tool. They also mean the outcome rests with whoever ran the migration.


The ten components: what each does, and what failure produces

Component Migration engine AI agent via MCP tools Consequence if absent
Import-specific endpoints Ticket Import API, audit field permissions Standard create tools Wrong dates, wrong authors, customer emails about old tickets
Archived and soft-deleted records The full-set call for each platform Default list calls Silent omission, found weeks later
Persistent ID map Database-backed, survives sessions Context window or an ad-hoc file Broken associations, no safe retry
Parent-before-child load order Enforced by the pipeline Depends on the prompt Rejected records, orphaned children
Idempotent loads by external ID Upsert logic built in Each create is a new record Duplicates on any retry
Attachments within expiry windows Download, upload, attach in one pipeline URL copy or timeout Broken links, silent loss
Pause destination automations Managed per platform Usually out of scope Customer emails, SLA errors, alert noise
Rate-limit backoff Per endpoint, coordinated across workers Per call, uncoordinated Half-written dataset, no clean resume point
Frozen mapping from a reviewed sample Reviewed, locked, reused for full run and delta Inferred at run time, can drift Wrong-field placement, hard to detect
Reconciliation report Per-object counts, field checks, checksums Chat summary No compliance evidence, gaps found in production

Two ways to run a migration with an engine

ClonePartner runs the same migration engineering in two ways. Choose by your source and destination pair and by your requirements.

ClonePartner Express Managed migration
Who runs it You, in the browser A dedicated migration engineer who owns the project
Pairs Gorgias from 17 help desks, Front from Intercom or Zendesk, Superhuman Docs from Notion or Slab, Google Docs from Confluence or Quip Any source and destination
Before you pay A free sample on your real data Unlimited sample migrations, included in the price
Suits A supported pair you want to run yourself Custom fields, relational records, permissions, compliance requirements
Price Shown on each Express site One fixed price per project, from $500

On Express, you connect both accounts, run the free sample, check the result, and then run the full migration yourself. On a managed project, the engineer freezes the field mapping after you review the sample, and the same mapping runs the full migration and the delta. The bulk load runs in the days before go-live while your team keeps working. Before the working day starts on Monday, the old system is frozen and a final delta of only the changed records takes about 30 minutes. Most managed migrations complete in 1 to 5 business days, depending on data volume, complexity and API rate limits. There is no hourly billing, no hidden fees and no change orders.

Info

Two ways to run it. If your source and destination are a pair ClonePartner Express supports, you can run the migration yourself: Gorgias, Front, Superhuman Docs or Google Docs, each with a free sample on your real data first. For any other pair, or custom fields, relational records, permissions or compliance requirements, talk to a migration engineer about a fixed-price managed migration.


Making the right call

An AI agent is a productive tool for schema exploration, mapping drafts and transformation logic. Use it there. A data migration is a bulk job where correctness is binary: the destination matches the source or it does not. The cost of a redo after users start working in the destination is measured in engineering days, user disruption and, in regulated environments, compliance exposure.

The ten components exist because the vendor APIs require them: Zendesk's import endpoint and its normal create endpoint, Salesforce's audit field permission, HubSpot's 10,000-result search cap, Notion's one-hour file URLs, and the rate limits and automation rules that differ on every platform. Each one is a documented constraint that produces a specific, expensive failure when it is ignored.

For deeper reading, see why DIY AI migration scripts fail, how we run migrations at ClonePartner, or using generative AI in SaaS data migration.

Frequently Asked Questions

Can a general-purpose AI agent run my help desk migration?
It can help with parts of it, such as drafting field mappings, transformation code and tests. Running the migration is a different job. The vendor MCP tools an agent calls are built for conversational work on a few records at a time, and they do not call the import paths that keep original dates and suppress notifications, such as Zendesk's Ticket Import API. A migration engine does, and a named person is accountable for the result.
What is a migration engine?
A migration engine is a deterministic pipeline that extracts records from a source platform, transforms them with a frozen field mapping, and loads them into a destination through import-specific endpoints. It keeps a persistent ID map, loads parents before children, handles attachment expiry windows, and produces a reconciliation report with per-object record counts.
Why do agent-run migrations lose original ticket dates?
Most platforms treat the created date as a system field that only one path can set. Zendesk stamps a ticket created through the normal endpoint with the current time, and its Ticket Import API is the path that sets created_at, updated_at and solved_at. Salesforce sets CreatedDate only on insert, and only when the org enables Set Audit Fields upon Record Creation and the loading user has that permission. HubSpot's Create date property is read-only for every object except deals.
Why do agent-written migration scripts create duplicates?
Because a retry calls a create endpoint again for a record that was already written. Safe reruns key on an external ID, so a retry updates the existing record. Salesforce's hosted MCP server has no upsert tool, and Zendesk's Idempotency-Key header expires after two hours, so a retry after that window creates a new ticket.
Where do AI agents add value in a data migration?
AI is useful for schema discovery, first-draft field mappings, transformation code and tests, and spot checks on small samples. The pattern in successful AI-assisted migrations is the same. AI drafts, a person reviews, and deterministic code runs the job.

More from our Blog

AI Agent Data Migration via MCP: The 2026 Guide
CRM/Help Desk/Migration Guide

AI Agent Data Migration via MCP: The 2026 Guide

AI agents are useful for drafting migration mappings and code. Vendor MCP servers are built for a few records at a time, so the bulk load needs a migration engine and someone accountable for the result.

Nachi Raman Nachi Raman · · 12 min read